Heavy Duty transport cabinets with universal tray slides for use with 12”
X 20” pans and 18” X 26” pans.
SecoSelect M11UA4UC Standard Features
Stainless Steel interior and exterior
Fully insulated
Cabinet is fully framed all vertical and horizontal edges
Caster mounting plates fully welded to cabinet framing
Caster mounting plates 6” x 6” x 5/16” steel plate drilled and tapped
All hardware mounted through framing
Door framed, insulated and gasketed
Door louvered with adjustable damper
Top mounted electronic control with digital display
60 to 230 degrees temperature range
Armor Heat™ system
5” casters standard
Low power requirements
Universal angles accommodate 250 lbs per pair
Universal angles adjustable on 1 1/2” centers
Universal angles will accommodate 2 (12” x 20”) pans. 1 (18” x 26”) or 2
(14” X 18”) trays
Universal angles designed to minimize pan/tray movement during transport
Universal angle posts removable for cleaning
SecoSelect M11UA4UC Specifications
GENERAL: Cabinet constructed with stainless steel interior and exterior.
All double wall construction, insulated with 2” high density fiberglass
insulation top, sides,door and bottom. All exterior surfaces shall be
ground and polished to #4 finish.
INTERNAL FRAME: All vertical and horizontal edges framed with a 1 1/2” x
1 1/2” x 1/8” angle steel, arc welded, cross braced and reinforced at
all corners.
BASE FRAME: 1/8” formed steel base. Base shall have, four 6” x 6” x
5/16”, steel plates drilled and tapped to accommodate 5”or 8” casters.
The plates are fully welded to frame on all four sides.
INNER CABINETS: Inner cabinets shall be all 24 gauge 300 series
stainless steel. Universal angles constructed of heavy gauge wire and
vertical and horizontal 11 gauge flat stock. Each pair shall accommodate
250 lbs. Universal angles are chrome plated with heavy nickel and a
clear coat. Angles adjustable on 1 1/2” centers. Angles will accommodate
2 (12” x 20”) pans or 1 (18” x 20”) tray or 2 (14” x 18”) trays.
DOORS: Doors shall be all 20 gauge stainless steel. Door shall have full
interior frame constructed of 3/4” x 3/4” 14 gauge galvanized steel
angle. Doors shall be fully insulated and gasketed. Doors shall have an
exterior louver with an interior damper for moisture control. All door
hardware shall be secured through framing in cabinet and door. Doors
shall have a heavy duty positive and magnetic door latch and heavy duty
refrigeration type door hinges.
ELECTRICAL CHARACTERISTICS: Cabinets shall have a top mounted control
panel consisting of an on/off switch with power indicator light and
electronic controller with digital temperature. Each cabinet shall be
heated by a 120 volt, 60 cycle, 1 single, Armor Heat™ system. Cabinets
shall come complete with a permanently mounted 8’ cord with a Nema #5-
15P plug. Top of cabinet is removable for easy access to controls.
CASTERS: Cabinet shall have 4 heavy duty 5” casters, 2 rigid and 2
swivel casters mounted to 6” x 6” x 5/16” steel plate drilled and
tapped.
The image above may not exactly represent the product
