Designed by SecoSelect to accommodate 18” x 26” trays and/or 12” x 20”
pans.
SecoSelect SH14UA Standard Features
Stainless steel interior and exterior
Fully insulated
Cabinet is fully framed all vertical and horizontal edges
Caster mounting plates fully welded to cabinet base
Caster mounting plates 6” x 6” x 5/16” steel plate drilled and tapped
All hardware mounted through framing
Door framed, insulated and gasketed
Door louvered with adjustable damper
Top mounted control panel
60 to 230 degree temperature range
Armor Heat™ system
5” casters standard
Low power requirements
Two completely separate fully insulated inner cabinets
Separate controls and heating systems for each compartment
Universal angles adjustable on 1 1/2” centers accommodate 250 lbs per
pair
Universal angles will accommodate 2 (12” x 20”) pans or 1 (18” x 26”)
tray
Universal angles chrome plated with heavy nickel and clear coat
Accommodates 5 sets of universal angles per compartment
Universal angle posts removable for cleaning
SecoSelect SH14UA Specifications
GENERAL: Cabinet constructed with stainless steel, all double wall
construction. Insulated with high density fiberglass insulation. All
exterior surfaces shall be ground and polished to a #3 finish.
INTERNAL FRAME: All vertical and horizontal edges framed with a
combination of 1 1/2” x 1 1/2” x 1/8” and 1” x 1” x 1/8” angle steel,
arc welded, cross braced and reinforced at all corners.
BASE FRAME: 1/8” formed steel base. Base shall have, four 6” x 6”x
5/16”, steel plates drilled and tapped to accommodate 5”, 6” or 8”
casters. The plates are fully welded to frame on all four sides.
INNER CABINET: SH14 - Inner cabinet shall be all 24 gauge 300 series
stainless steel. Inner cabinet shall have permanently mounted rails.
Shall have universal angles constructed of heavy gauge wire, and
vertical and horizontal, 11 gauge flat stock. Each pair shall
accommodate 250 lbs. Universal angles are chrome plated with heavy
nickel and a clear coat and adjustable on 1 1/2” centers. Holding posts
removable for cleaning. Universal angles will accommodate 2 (12” x 20”)
pans per set, or 1 (18” x 26”) tray, or 2 (14” x 18”) trays. Inner
cabinet fully insulated with high density fiberglass; 2” on sides, back,
top and bottom. Cabinet shall have Armor Heat™ system.
DOORS: Doors shall be all 20 gauge stainless steel. Door shall have full
interior frame constructed of 3/4” x 3/4” 14 gauge galvanized angle
steel. Door shall be fully insulated and gasketed. Doors shall have an
exterior louver with an interior damper for moisture control. All door
hardware shall be secured through framing in cabinet and door. Door
shall have a heavy-duty positive and magnetic door latch and heavy-duty
refrigeration type door hinges.
ELECTRICAL CHARACTERISTICS: Each cabinets shall have a top mounted
control panel consisting of an on and off switch with power indicator
light, electronic temperature control with digital display. Each cabinet
shall be heated by a 120 volt 60 cycle 1 phase heating system. Cabinets
shall come complete with a permanently mounted 8’ cord with a Nema
#5-15P plug. Top of cabinet is removable for easy access to controls.
CASTERS: Cabinet shall have 4 heavy duty 5” casters, 2 rigid and 2
swivel casters mounted to 6” x 6” x 5/16” steel plate drilled and
tapped.
The image above may not exactly represent the product
