The STERO ER-86S provides a powerful scrapper, recirculating heated wash and rinse tanks followed by a fresh
water rinse creating a high volume, low water consuming washer in an 86" footprint. The scrapper tank does
the work of a manual pre-rinsing operation, but does it
faster and better with 185 gpm of re-circulated water,
stripping food soil from above and below the ware.
Stripping food soil prior to washing increases labor and
detergent savings. Food soil is transferred to the outboard scrap catchment automatically by the rinse water
feed-back system keeping the scrapper tank water clean.
The full rack width washing pattern with our 225 gallons
per minute pump powers this dishwashing workhorse.
Rinsing and sanitizing is controlled by STERO’s exclusive
rack activated final rinse which guarantees accurate,
trouble free cleaning.
Standard Features:
270 racks per hour
Rinse 2.01 gpm /.49 gallons per rack
Automatic fill maintains proper tank levels
Automatic start, rack activated switch starts
conveyor and pumps
Automatic shut down stops operation during idle
periods
2 HP wash and rinse motor each recirculating
225 gpm
Single point drain connection
2 large inspection doors
Center-fed wash and rinse manifolds
Stainless steel front enclosure panel protects motors
and controls from moisture
Door safety switches prevents operation if door is
open
Stainless steel drain valves and poppets, foot
activated
Kit 55, included prv, shock arrestor and pressure
gauge in final rinse line
Bell-type stainless steel skimmer acts as overflow and
removes fats and oils from the wash tank