The STERO SCT-120S/SC will process over 8,400 dishes
per hour. It starts with the same wash and rinse system
as the SCT-76 only in a 88" base for more separation
allowing a conveyor speed of 13 feet per minute. Add
a unique 32" scrapper to create the SCT-120S/SC. This
scrapper features a 28 jet sprayer manifold located
above and below the ware to create STERO’s most powerful scrapping system, replacing the need of a manual
pre-rinsing operation and lowering detergent costs.
The SCT-120S/SC process features a power scrapper,
heated recirculating wash and rinse tanks equipped
with a 28 jet sprayer manifold top and bottom located
in each tank, followed by a fresh water rinse in a 120"
footprint. Rinsing and sanitizing is controlled by STERO’s
exclusive rack activated final rinse which provides accurate, trouble free cleaning.
The STERO SCT-120S/SC can be engineered in a straight
line or with an optional corner loading scrapper.
Standard Features:
468 racks per hour
Rinse 5.3 gpm /.68 gallons per rack
Automatic fill maintains proper tank levels
Automatic start, rack activated switch starts
conveyor and pumps
Automatic shut down stops operation during idle
periods
2 HP wash and rinse motor each recirculating
225 gpm
Single point drain connection
2 large inspection doors
Center-fed wash and rinse manifolds
Stainless steel front enclosure panel protects motors
and controls from moisture
Door safety switches prevents operation if door is
open
Stainless steel drain valves and poppets, foot
activated
Kit 55, includes prv, shock arrestor and pressure
gauge in final rinse line
Bell-type stainless steel skimmer acts as overflow and
removes fats and oils from the wash tank