Exterior bottom shall be heavy-gauge galvanized metal. Exterior ends shall
be heavy-gauge stainless steel.
Door shall have a heavy-gauge stainless steel exterior, with a
thermoformed ABS plastic interior liner, and shall be fully insulated.
Door handle shall be black, recessed ABS. Cabinet shall have (1)
adjustable epoxy-coated wire shelves installed.
Refrigeration System
Refrigeration system shall use R290 refrigerant. Compressor shall be 1/5
h.p., with condenser coil and hot gas condensate evaporator mounted on
rear of cabinet. Evaporator coil shall be mounted on the interior rear
wall of the cabinet. Temperature control is mounted to the exterior rear
of the cabinet. Refrigerant flow shall be controlled by a capillary tube.
Cabinet shall maintain 36°F to 40°F (2°C to 4°C) interior cabinet
temperature. System is controlled using Delfield’s ACT-Advanced Control
Technology electronic temperature control, which provides improved pull
down times, reduces compressor cycling and longer compressor life with
lower energy consumption.
Base Interior
Base interior shall be one-piece thermoformed ABS plastic material, with
integral shelf supports. ABS interior is backed by a limited lifetime
warranty. Base shall be fully insulated with high-density foamed-in-place
environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone
Depletion Potential), Non GWP (Global Warming Potential) polyurethane.
Electrical Connections
Electrical connections shall be 115 volt, 60 Hertz, single phase. Unit
shall have a 6’ (1.8m) long electrical cord and NEMA 5-15P plug. Cord and
plug shall be located on rear of cabinet, 16” (40.6cm) above floor, 5”
from the left side.
Delfield 406-CAP Standard Features
Features Delfield’s exclusive ABS interior (on sides). ABS is extremely
durable - it won’t dent, chip or corrode and is backed by a limited
lifetime warranty
Foamed in place environmentally friendly, Kyoto Protocol Compliant, Non
ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential)
polyurethane cuts energy costs
Rugged 6” high heavy duty metal legs (model 406P only). Units with a
“CAP” suffix are standard on 3” diameter (3.75” ride height) casters
All units come standard hinged right and may be changed at the factory
at no charge. Indicate when order is placed
Stainless steel front and sides
406-CAP: Undercounter refrigerator single section on casters
Environmentally friendly R290 refrigerant
One epoxy coated wire shelves
Black recessed quick grip handle
6’ cord and plug supplied
Interior thermometer
Three year parts and labor warranty and an additional two year
compressor parts warranty