| Brand | Delfield |
|---|---|
| Model Number | ST4048P |
| Weight | 234 lbs |
| Width | 48" |
| Depth | 28.5" |
| Height | 39.5" |
| Sections | 2 section |
| Refrigeration | self-contained, rear mounted |
| Exterior Finish | stainless steel top, front & sides |
| Interior Finish | stainless steel & ABS |
| Access Type | doors |
| Number of Doors | 2 doors |
| Compressor HP | 1/5 HP |
| Energy Efficiency | ENERGY STAR® |
| Special Features | with backsplash |
| Capacity (cu. ft.) | 10.8 |
| Compressor Style | side / rear breathing |
| Door Type | solid door |
Exterior top is one-piece, 22-gauge stainless steel with front edge turned down to form nosing and rear edge turned up to form a 4” (10 cm) high backsplash. Exterior bottom shall be heavy-gauge galvanized metal. Exterior ends shall be 22-gauge stainless steel.
Base interior is one-piece thermoformed ABS plastic material, with integral shelf supports. Cabinet shall have (4) epoxy-coated wire shelves installed. Base shall be fully insulated with highdensity foamed-in-place environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane.
Doors have a 22-gauge stainless steel exterior, with a thermoformed ABS plastic interior liner, and shall be fully insulated with foamedin-place polyurethane. Door handles shall be black, recessed ABS.
Electrical connections are 115 volt, 60 Hertz, single phase. Unit shall have a 6’ (1.8m) long electrical cord and NEMA 5-15P plug. Cord and plug shall be located on rear of cabinet, 16” (41 cm) above floor, 12” (30 cm) from the left. Equipment shall be mounted on 6” (15 cm) high metal legs with black enamel finish.
Refrigeration system uses R290 refrigerant. Compressor shall be 1/5 h.p., with condenser coil and hot gas condensate evaporator mounted on rear of cabinet. Evaporator coil shall be mounted on the interior rear wall of the cabinet. Temperature control is mounted to the exterior rear of the cabinet. Refrigerant flow shall be controlled by a capillary tube. Cabinet shall maintain 36°F to 40°F (2°F to 4°C) interior cabinet temperature.
The image above may not exactly represent the product
