The Delfield T2-1221H Mobile Enclosed Tray and Rack Dispensers
Delfield T2-1221H Heated Dispensers Specification
Heated dispensers shall have a stainless steel liner separated from the
outer panels by 2.00” (5cm) of fiberglass insulation. Unit shall be
supplied with 9’ (2.7m) cord and plug as shown in the specifications table
on reverse. Electrical connections shall be 120 volt, 60 hertz, and single
phase
Dispenser shall have one or two convection heating modules consisting of a
single 700-watt heating element and fan motor, located in the center of
the interior bottom cavity. (Heated T/ T2 models 1014-1422 shall have one
module; larger models have two modules.) Air intake shall have a filter.
Dispenser shall have an adjustable thermostat and an ON/OFF switch on the
side of the unit. Unit shall maintain a temperature between 150°F-170°F
(66°C-77°C).
Delfield T2-1221H Standard Features
Heated dispenser has a stainless steel liner and 2.00” of fiberglass
insulation
T2-1221H: Two stack, heated
On/off switch and 9’ cord and plug standard
Dispenser is heated with convection heated modules
Air intake is standard with filter
Adjustable thermostat
Temperature between 150-170°F (66-77°C)
One year parts and 90 day labor warranty
Delfield T2-1221H Options & Accessories
Flange-mount feet in lieu of casters
Special tray & rack sizes
Six, eight, or ten hole silverware bins with plastic or stainless steel
cylinders
Additional plastic or stainless steel silverware cylinders