Delfield TT2-1826 48" 2-Stack Open Tray Rack Dispenser for 18" x 26" Trays, Mobile

Delfield TT2-1826 Specification

Framework

Framework shall be integrally welded 1.00” (2.5cm) O.D. 16-gauge stainless steel tubing welded to a 16-gauge stainless steel base. Frame shall have stainless steel horizontal support rods affixed to the tubing. Base shall be reinforced with full-length 14-gauge stainless steel angles.

Casters

Unit shall have four 4.00” (10.2cm) diameter Polyurethane swivel casters (all locking) (5.00” [12.7cm] ride height) and non-marking gray bumpers at each corner.

Dispenser

Dispenser platform carries shall be 18-gauge stainless steel and shall be removable for cleaning. Each dispenser shall have 2 self-leveling mechanisms.

Self-leveling

Self-leveling mechanisms shall be field adjustable by adding or removing stainless steel extension springs located inside the elevator housing.

Delfield TT2-1826 Standard Features

• Self-leveling mechanisms shall be adjustable by adding and removing stainless steel extension springs located inside the elevator housing
• TT2-1826: Two stack, 18”x26” trays
• Tubing and base to be 16-gauge stainless steel
• Tubing and base to be integrally welded
• Base to be reinforced with 14-gauge stainless steel angles
• Non-marring gray corner bumpers
• (4) 4.00” diameter Polyurethane swivel casters (all locking)
• Dispenser platform carrier shall be 18-gauge stainless steel
• Each dispenser section holds approximately 50-60 trays (varies per tray style)
• One year parts and 90 day labor standard warranty

Delfield TT2-1826 Options & Accessories

• Flange-mount feet in lieu of casters
• Napkin dispensers
• Six- or eight-hole silverware bins with plastic or stainless steel cylinders
• Wrap-around bumpers (adds 1.75” [4.4cm] to overall length and depth)
• Dust cover