Exhaust fan packages are comprised of upblast grease exhaust fan(s) and untempered supply fan. Upblast grease exhaust fans are available in roof mounted and side-wall mounted configurations. Grease exhaust fan(s) include vented factory curb, hinge kit, and grease box, and emergency disconnect switch. Supply fans include factory roof curb or wall mount bracket. Supply fan options for direct fired gas and electric heat are available upon request.
The pre-wired electrical control package is designed to control exhaust fan(s), supply fan, and lights for the kitchen ventilation system. The control package is designed to thermostatically activate the exhaust fan(s) whenever elevated temperatures are sensed in the exhaust system. This option will meet the requirements of IMC 507.2.1.1 by providing a thermostat(s) mounted in the duct or hood riser to sense increased exhaust temperatures. The electrical package are pre-wired at the factory based to meet specific applications and include color-coded wiring. As-built wiring diagrams are provided and are posted inside of the panel.
Fire suppression package includes factory pre-piped nozzles and detection based on cooking appliances under the hood. Fire suppression system options are available for fire system hook-up, permit, and final test through licensed fire suppression distributor.
EconAir’s EX-2 Exhaust Only Hood efficiently meets the challenges of most
Why Use EconAir's EX-2?
Econ Air EX-2 10ft Exhaust Hood is a Type 1 commercial kitchen hood manufactured by Econ Air, a subsidiary company of Captive Aire. This model is stainless steel construction and wall-mounted or double island. Its exhaust canopy helps you collect and remove the grease-laden vapors and smoke of any commercial kitchen equipment.
Econ Air Hood Ex-2 High Performance
Econ Air EX-2 10ft Exhaust Hood is tested and can be used over 450ºF light/medium duty cooking surfaces, 600ºF heavy-duty* cooking surfaces, and up to 700°F extra-heavy-duty* cooking surfaces. ETL Listed and ETL Sanitation Listed Econ Air Model EX-2 10ft Exhaust Hood has exceptional features of capturing and containing cooking vapors.
Econ Air 10ft Exhaust Hood Standard Features
Integral Front Baffle To Direct Grease-Laden Vapors Toward The Exhaust
All Seams Are Welded Or In Conformance With Ul 710 Standards
UL Classified Heavy Duty Grease Baffle Filters
Wall Or Back-To-Back Island Configurations
Superior Exhaust Flow Rates
430 Stainless Steel Construction
Double Wall, Insulated Front
An Integral Grease Drain System
Grease Drain System
Pre-Punched Hanging Angles
Factory Pre-Wired Lighting
Econ Air 10ft Exhaust Hood Optional Features
Econ Air EX-2 10ft Exhaust Hood comes with outstanding standard features. You can also find suggested optional specifications to increase your Econ Air Hood’s performance and efficiency here.
Fire Suppression System
Type 304 Stainless Steel Construction:
– Exposed Surfaces Only– 100% Construction
Utility Cabinet, Electrical Controls and Face Mounted Controls
Front Perforated Supply Plenum
Rear Make-Up Air Plenum
Integral Clearance to Combustibles System
UL Listed Exhaust Fire Damper
Enclosure Panels to Ceiling
– High-Velocity Cartridge Filters– Stainless Steel Baffle Type Filters– High-Efficiency Filters– Captrate combo Solo Filters