The Southbend Heavy-Duty Counterline products are designed for medium to
heavy-duty applications. Southbend's counterline offers unsurpassed performance,
combining proven control systems with Southbend quality and durability.
Southbend HDG-24V Features
HDG-24V: 24" Thermostatic Griddle - Heavy Duty
Counterline - High-Volume - Gas - 60,000 BTU
30,000 BTU (NAT) burner per 12”
Electronic spark ignition (battery)
Stainless steel front, vent and sides are standard, rear and bottom panels are aluminized steel.
Reinforced, insulated double wall sides
1” thick polished rolled steel plate
5” high rear and 4” side splash guards
3/4” rear gas connection and pressure regulator
Protected flue opening
Exclusive “NO COLD” Zone - Uniform heat distribution across surface
Each burner equipped with runner tube
Two grease basins with large capacity (16 quarts each)
Fully welded griddle plate with protected exhaust vent
“Insta-on” thermostatic controls for precise settings between 200°F and 400°F
Imbedded load sensing thermostat
Flame failure safety device
Stainless steel front towel bar
Southbend HDG-24V Specification
Exterior Finish: Front, sides and vent are constructed of #3
polished 430 and 304 stainless steel. Bottom and rear are
aluminized steel. Sides are reinforced and fully insulated. 5”
rear and 4” side splash.
Griddle Plate: 48” wide unit, 30,000 BTU (NAT) per 12” burner.
Fully welded, 1” thick polished steel griddle plate with side splash
Griddle Controls: Independent, “Insta-on” thermostatic
controls with uniform temperature range of 200°F to 400°F. (Thermostatic
Casters: 4” casters for stand.
Basin: Second grease basin provided as spare for quick change.
(Excluding model HDG-24V)
Gas Heat Control System: Each foot of griddle is heated by a
“U” shaped burner. Each burner is controlled by a thermostatic
control. For safety, each pilot has a flame failure device. A 3/4”
rear gas connection is standard