The Southbend P16C-C Platinum Series Sectional Range Full-Width Charbroiler
Why Use Southbend Sectional Range?
The Platinum Series provides professional performance that chefs and
restaurateurs can depend on. Made with 100% Stainless Steel construction,
the Platinum Series includes heavy-duty ranges, griddles, planchas,
charbroilers, stock pot ranges, fryers, uniform hot tops, french tops, and
broilers that can be combined for a 100% custom line-up to fit the needs
of any high-volume operation.
Southbend P16C-C Features
P16C-C: Platinum Sectional Gas Range - 16" Charbroiler
- Cabinet Base - 40,000 BTU
16" wide sectional range with full-width charbroiler available with a
cabinet base or as a modular unit (for mounting on countertop,
refrigerated or freezer base)
Two 20,000 BTU NAT (18,000 BTU LP) burners with one high/low control
knob
Stainless steel cabinet with a removable door that can hinge on the
right or the left.
Removable cast iron grates with adjustable front-to-back slope that flip
over for either 1/8" or 1/4" grid width
600°F even surface temperature on high setting
Stainless steel burner radiants
9-1/4" deep front rail
Removable drip tray
Stainless steel front, sides, rear and exterior bottom
Fully insulated lining and burner box
1-1/4" front gas manifold and 1" rear gas connection
5" high stainless steel flue riser
Free battery-design assistance
(1) year limited parts and labor warranty
Southbend P16C-C Specification
Exterior Finish: Front, sides, rear and exterior bottom
constructed of #3 polished 430 and 304 stainless steel.
Range: 16"-wide front-manifold sectional range with
40,000 BTU NAT (36,000 BTU LP) full-width charbroiler with
removable cast iron grates and operating surface temperature
of up to 600°F (315°C).
Front Rail: 9-1/4" deep front rail.
Flue Riser: 5" high stainless steel flue riser
Battery: Unit can be in any position in a battery. If
the unit is at the end of the battery, the end side will be solid
(rather than have a cover plate over the end of the front manifold).
Cabinet Base: Stainless steel cabinet base with a
removable door that can hinge on the right or the left.
Legs: 6" stainless steel adjustable legs standard.